2 heads are better than one!

As part of the growing line of Tonebone foot pedals, Radial introduces the Headbone VT, a guitar amplifier head switcher that allows the player to transition from, for example, a Mesa Boogie Dual-Rectifier to a Marshall JCM800 while using the same cabinet. The Headbone employs a series of photocells to assure noise-free guitar-to-head switching and a series of high cycle relays that switch between the 2 heads and the speaker. A digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system and controls the transition between equipment to ensure proper amplifier loads are always maintained.

Radial Headbone VT Amp Head Switcher for Tube Amps Features:

• Amp head switcher
• Employs a series of photocells for noise-free switching
• High cycle relays switch between the 2 heads and the speaker
• Digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system
• Controls the transition between equipment to ensure proper amp loads

Get your heads together with the Headbone. Order today!

Radial Headbone VT Amp Head Switcher for Tube Amps

Write A Review

Average of 2 User Ratings

Overall

Quality

Features

Value

Customer Reviews

Overall

Quality

Features

Value

Here's what they don't tell you

Posted by plinky from Dallas, TX on Jul 10, 2007

Experience w/product: I own it

Reviewer's Background: Acrtive musician 20+ years

Reviewer's Play Style: rock, country, dance, etc.

It works. I successfully used a Headbone to switch between a Fender Deluxe Reverb reissue and a Mesa Boogie Single rectifier into the single 12 inch speaker of the Deluxe (had to split open a speaker cable to connect to the speaker). Switching is very quiet (no pops), and the unit is very sturdy. However, the biggest problem I had with it was the fact you can't use effects in the effects loop of your amplifier (see the manual on Radial's website). If you don't use any effects, it works great. If you do use effects (especially in the effects loop), then reconsider purchasing one.

Overall

Quality

Features

Value

The best piece of gear I own.

Posted by LUJazzGuitar from Beaumont, TX on May 31, 2005

Experience w/product: I own it

Reviewer's Background: Active Musician/Band Director

Reviewer's Play Style: Rock, Jazz, Praise and Worship

For years I have wanted a piece of gear that would allow me to switch between the crunch channel of my EL34 Marshall and the clean channel of my 6L6 Mesa Boogie and be able to run both of them on my Marshall cab. Now I have the power! Add a Tube Screamer in the mix and there is no limit to the sounds I can achieve. I play a lot of different styles that call for a lot of different tones. Thanks to the guys at Radial Engineering I now have the tonal freedom I need! This is a must have piece for any player with a multi-amp set up.

If you would like to write a review, please see our product review guidelines.

Radial Headbone VT Amp Head Switcher for Tube Amps

Read 2 Reviews

$259.99

MSRP: $350.00 Savings: $90.01(25%)

Finance Now for $26/mo.

Availability: In-Stock & Ready To Ship!

Gold Coverage Protection Warranty: (What's this?)

Qty:Add To Cart Add To Wishlist